Products | JAY HARI ENTERPRISES

PORTABLE DUST EXTRACTION SYSTEM – HUNGER

The portable dust extraction system collects the sanding dust in a container and the same can be disposed later. Handling and disposal of the sanding dust becomes easy making the work place clean and safe.

Model: Hunger

ApplicationsFeatures & BenefitsSpecificationsCatalogueRequest a Quote

Suitable for dry sanding applications in both automotive bodyshops / garages
Carpentry works and industries

High suction capacity of 2.6 m³/min
Automatic on-off motor
Dual action sander
Simultaneous usage of dual sanders
Variable vacuum control
Long running filter
Thermal protection device: max. motor working heat 125 ° C
Low running costs
Ensures pollution free environment
HEPA filtration

S.No	Specifications	Portable Dust Extraction System – Hunger
1	Voltage	230 V / 50 HZ
2	Power Absorption	1.1 KW
3	Suction Capacity	2.6 m³/min
4	Tank Capacity	40 L
5	Max Vaccum	2200 mm H2O
6	Dimension	562 x 500 x 810 mm

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*

INFRARED DRYERS

Infrared dryers are used in body shop for drying painted jobs with better quality at a very short time.In a traditional paint booth the hot air is made to pass on the jobs which will dry it from top-to-bottom. Due to this some moisture will remain inside the layers which will result in improper finish/short life of the job done. Whereas IR dryers uses short wave technology which heats the job from bottom-to-top so that the moisture inside each layer is eliminated which results in quick drying time and ensures long life for the painted jobs.

ModelsApplicationsFeatures & BenefitsSpecificationsCatalogueRequest a Quote

3 Lamp Models (IRD3)
6 Lamp Models (IRD6) Available on request

Suitable for automotive bodyshops / garages and industries
For drying putty,primer,paint and clear coat
For drying single panel jobs

Hydraulic lifter turning around 300 degrees
Short wave infra red technology
Automatic distance sensor
LED display with electronic timer
Can reach any part of the car including roof
Reduced drying time with low running cost
Safer, smarter and faster
Each lamp can be controlled separately

S.No	Specifications	IR – 3 Lamp Model
1	Input Supply	1 Ph, 230 V, 50 HZ
2	No. of Lamps	3
3	Automatic distance sensor	Yes
4	Display type	LED
5	Temperature	40-100 deg
6	Curing Area	1200 x 1000 mm
7	Lifter type	Hydraulic
8	Turning Radius of Lamp	360 deg
9	Technology	Short wave
10	Dimension	1000 x 750 x 1800 mm
11	weight	45 Kg
12	Lamp	21 inch quartz halogen lamp

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*

Radiator Check & Fill System

ApplicationsAdvantagesSpecificationsCatalogueRequest a Quote

Applicable for passenger cars, commercial vehicles and trucks.

Dramatically reduces filling time and eliminates airlocks in cooling systems, integrated vacuum gauge automatically tests cooling system for leaks.

Air Pressure	80-130 psi
Air Consumption	180 ltr/min (10 cfm)
Vacuum	25″ Hg at 100 psi
Thread Connection	1/4″ BSP
Container Capacity	1500 ml

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*

Ratchet Pump

ApplicationsAdvantagesCatalogueRequest a Quote

Can adapt brake fluid
Power steering fluid
Transmission fluid
Engine oil
Coolant and gear oils

Convert your 3/8″ ratchet into a fluid transfer pump.

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*

PLASMA CUTTER

Plasma cutter are used in body shop for cutting of metals. Plasma is nothing but fourth state of matter. Pressurized air is made to pass on the job , when the electrode (torch) comes in contact with the job an arc is produced which heats up the pressurized gas and creates plasma which is sufficient to cut the metal.

Model : Plasma 22

ApplicationsFeatures & BenefitsSpecificationsDownloadsRequest a Quote

Suitable for all models of passenger cars , SUV and MPV
Suitable for jobs with 6 – 8 mm sheet thickness

Inverter technology
Equipped with power factor correction device
Pilot Arc to cut painted or coated metals
Cutting operation on superimposed thin sheets
Safety systems on the torch
Pilot arc starts without high frequency – so the machine can be operated next to electronic devices sensitive to high frequencies
Post-gas function
Electronic regulation of cutting current
Microprocessor-controlled cutting parameters and functions
Low power consumption
Precise cutting and removing of damaged parts
4 metre-long P25 torch – comfortable to operate
Thermostatic protection
High duty cycle

S.No	Specifications	Plasma Cutter
1	Dimensions	135x430x260h mm
2	Input Voltage	1×230 V 50-60 HZ
3	Cutting current	5 -20 A
4	Duty cycle – 10 MIN CYCLE	35% 20 A – 60% 18 A – 100% 15 A
5	Compressor air pressure	4 -7 bar
6	Air flow	40 l/min
7	Cut thickness on steel	6 – 8 mm
8	Max separation cut	10 mm
9	Protection class	IP 23
10	Weight	9.5 kg

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*

INVERTER MIG -MAG WELDERS

There is a shift in the trend of MIG MAG welders from transformers to inverter type as inverter welders have high welding power and low power consumption. Inverter technology reduces the size of the transformer and thus making the machine light weight.

Model:MIG 240

ApplicationsFeatures & BenefitsSpecificationsCatalogueRequest a Quote

Suitable to weld steel , stainless steel and aluminium
Suitable for automobile bodyshops/garages and industries
Welding of cut open body panels
Body parts can be joined together
Spot welding on areas where regular spot welders arm cannot reach

Dedicated control to fine tune the arc length
Equipped with power factor correction design
High quality torch for perfect finish
Support wire reels weighing 5 Kg and 300 mm dia
Wire feeder unit and cylinder stand are in standard scope
Automatic setting of welding parameters
High quality weld
Compact and light weight

S.No	Specifications	MIG 240
1	Power Specifications	230 V, 50 Hz
2	Min & Max Current	20 to 220 A
3	Max Absorbed Power	4.8 kW
4	Load at 60%	2.7 kW
5	Wire thickness	0.6 to 1 mm (steel), 0.8 to 1 mm (Aluminum)
6	Protection degree	IP23
7	Dimensions	825 x 360 x 670 mm
8	Weight	21 Kg

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*

Cam Clamp Timing Gear Clamp

ApplicationsAdvantagesCatalogueRequest a Quote

Ideal for diesel injection pump; belt replacement and single, dual or quad overhead cam engines to hold valves during belt replacement

Holds valve timing during belt replacement and easy to install.

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*

TRANSFORMER MIG – MAG WELDERS

MIG – MAG welders is also known as Metal Inert Gas welding or Metal arc gas welding. They use a continuously fed wire electrode to form an arc and to provide filler metal. A shielding gas is used to shield the weld from atmospheric contamination and oxidation.This type of welding find its application to butt body parts together.

Model: MIG 2400

ApplicationsFeatures & BenefitsSpecificationsCatalogueRequest a Quote

Suitable to weld steel , stainless steel and aluminium
Suitable for all models of passenger cars , SUV and MPV
Welding of cut open body panels
Body parts can be butt together
Spot welding on areas where regular spot welders arm cannot reach

Wire feeder unit and cylinder stand are in standard scope
High quality torch for perfect finish
Wire feed speed can be adjusted
Possibility to adjust welding current and time
Supports 15 Kg wire spool with 300 mm dia
Portable

S.No	Specifications	MIG 2400
1	Dimensions	506x887x648h mm
2	Input Voltage	3×230/400 V 50-60 Hz
3	MIN-MAX Welding current	15 – 220 A
4	Duty cycle – 10 MIN CYCLE	35% 170 A ,60% 130 A , 100% 100 A
5	Regulation steps	N° 1 x 7
6	Max. wire spool size	Ø 300 mm / 15 kg
7	Protection class	IP21
8	Weight	53 kg

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*

Vaccum Brake Bleeder Kit

ApplicationsAdvantagesSpecificationsCatalogueRequest a Quote

Compact size fits easily in the wheel area and universal rubber holds securely on brake bleed screw.

The ultimate one-man brake bleeding system and fast efficient vacuum brake bleeding.

Air Pressure	80-130 psi
Air Consumption	180 ltr/min (10 cfm)
Vacuum	25″ Hg at 100 psi
Thread Connection	1/4″ BSP
Container Capacity	500 ml

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*

Cooling System Pressure Tester

ApplicationsAdvantagesSpecificationsCatalogueRequest a Quote

Universal attachment to radiator or heater tanks. It suits automotive, commercial, heavy duty, marine and motorcycle.

Patented inflatable bladder attaches to radiator or header tank for system testing.

Pressure pump	0-30 psi
Bladder tested	1500 inflations
Suits neck diameters up to 45mm
Max pressure	30 psi

Click Here To Download The Brochure

Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*