EM 9380 C Xline
Features & BenefitsSpecificationsDownloadsRequest a Quote
- The new wheel guard allows use whit wheel sizes up to 44”.
- LED spotlight to light-up the work area and make it easier to clean the rim, check the wheel and apply weights.
- The adhesive weights can be positioned extremely rapidly using the laser pointer at 6 o’clock.
- Automatic wheel positioning in the point where the balancing weight has to be applied and electrical positioning brake (RPA).
- Electronic input of wheel diameter and distance with FSP function which automatically activates the balancing programmes, avoiding keypad selection.
- AWD Sonar device - AWD automatic sensor (Auto width Device) for contactless measurement of wheel width (optional).
- OPT Flash - Minimises road noise by allowing the operator to alter the position of the tyre on the rim in order to optimise quietness.
- Auto width calculation - Automatic calculation of the width (AWC function) even if the AWD external sensor is not present.
- EM9380 C with new “PNEULOCK” automatic air wheel clamping system, with constant torque, for shorter operative times and higher centring accuracy.
- Weight Management - Special suite of programmes including LESS WEIGHT, which cuts job times (20%) and reduces the quantity of counterweights used (30%), for more cost-effective, environmentally friendly operation.
| Parameter | Range |
|---|---|
| Rim width setting range | 1.6” -23.6” |
| Rim diameter setting range | 2” - 35” |
| Rim diameter measurement range | 10” - 32” |
| Wheel maximum width | 560 mm / 23.6” |
| Wheel maximum diameter | 1118 mm / 44” |
| Wheel weight | 75kg |
| Balancing speed | 75-85-98 rpm |
| Average measurement time | (14kg wheel) 7 s |
| Power supply voltage | 115÷230V1ph 50/60 Hz |